
This is the LATEST innovation in HF mobile antennas! It is the PATENTED version of the standard Hi-Q Series of HF mobile and base antennas. The loading coil has 9.5" usable travel with approximately 350 uH inductance.
The Hi-Q-5/160 will cover the 10-160 M
bands (i.e.: 1.8 MHz to 30 MHz.)
and is offered in either a MT (Manually Tunable) or RT (Remotely
Tunable - motorized)
version.
Mechanical details:
Lower mast, below coil:: 2' x 1.5" stainless steel. Coil Size: 5" diameter x 11.5" long, Lexan Whip needed: 160m: 102" whip (not supplied). No CapHat needed, however it will improve Radiation Efficiency if used.
80-10m: 36" to 60" whip (not supplied)
Photo Shown is: Hi-Q-5/160 RT with 2' Extension Rod and 32" CapHat.Weight: 8 lbs Tuning and Controller Information: MT: Knob at the base, sliding up/down.
RT: The RT version has a Precision 12VDC Gearhead Motor (NOT a screwdriver!!!)Recommended Controllers:
- Simple DPDT switch.
- MFJ-1922B or similar controller. ALL Hi-Q-Antennas now have a magnet to count rotations of the motor-output shaft. So, by adding an optional reed switch externally, you get a "pulse per revolution" for the MFJ-1922B or similar controller.
Electrical details: (mid-mounted on standard auto)
Freq: 1.8 MHz Base length: 2' Base diameter: 1.5" stainless steel
CapHat: 32 inch lobes Radiation resistance: .2 ohms Electrical length: 8 degrees Degree-amp: 4.8 Estimated ground loss: 6 ohms Overall antenna: "Q" 83 Top, whip: 102" Shunt: 2300 pF for L match to 52 ohms Power handling: SSB legal limit
Coil data:
Inductance: 350 uH Reactance: 3140 ohms Wire size: 12 AWG Coil diameter: 5" Coil length: 10" (8" usable) Pitch: 11 Coil "Q" 580 Loss resistance: 16 ohms 100 w I (rf): 2.1 amps
Performance:
1.8 Mhz3.750 Mhz
Radiation Efficiency: 1.3% ** Relative radiated power: -19.2 dB Feed point impedance: 22 ohms Bandwidth for 2:1 VSWR 19 kHz 7.2 Mhz
Radiation Efficiency: 12% Relative radiated power: -9.2 dB Bandwidth for 2:1 VSWR 35 kHz Coil "Q" 450 14.2 Mhz
Radiation Efficiency: 43% Relative radiated power: -3.7 dB Bandwidth for 2:1 VSWR 120 kHz
Radiation Efficiency: 77% Relative radiated power: -1.1 dB Bandwidth for 2:1 VSWR 475 kHz Excellent performance on the rest of the higher bands!
** NOTE: If this was a
BRAND "X" screwdriver antenna it would have a Radiation Efficiency of
Less than 1/10th watt (that is right, one tenth of a watt out of your
100 w. radio)... a real QRP set up. And, yes, QRP rigs get out, but
with the Hi-Q Series antennas you WORK THE WORLD!
The Hi-Q-5/160 antenna is similar in construction to our Military
version, with the exception that the CAP/BASE of the coils is 6061-T6
aluminium instead 400 series stainless steel. The gearhead motor is
also stainless steel.
Plug-n-Play
Packages Available! (RT Remote Tune Model Only)
Package A
Package B
Supply your own coax, two or four conductor cable and connector (power
/ turn-counting), ~4ft whip, controller or DPDT switch and antenna
mount, and you are on the air!
Pricing and Ordering
Hi-Q-5/160 Photo Album
Click the thumbnail below to see a larger image
![]() |
More Photos in the Photo Gallery >
|
Copyright 2003, All Rights Reserved. "Hi-Q-Antennas"
is the registered Trademark of Charles M. Gyenes
Web Site Design and Hosting by QTH.COM