- VERY LOW wind-resistance variable SINGLE lobe size!
- Will fit on ANY stainless steel std. tapered whip.
- Movable UP-DOWN on the entire whip length!
- Measured performance enhancement! (Even on brand-X contraptions)
COST: $15.00 plus shipping & handling. See below to order
We also have non-adjustable four-lobe CapHats available. Click Here for details.
Click each photo to enlarge
NOTES:
- CapHat MUST be used with either a 1' or 2' long extension rod, NOT directly on top of the loading coil.
- When the #2 size is used on the Hi-Q-3/80 antenna, it REMOVES 14 turns of the 56 from the loading coil. Or you can shorten the whip by at least 3'.
- When the # 3 CapHat is used on the Hi-Q-3 the resonant frequency is: 3.700 MHz WITH NO WHIP! Therefore now you have a 4' tall antenna.
- Whichever CapHat you choose, you will need either the 1 foot or 2 foot long Extension Rod, your choice.
